Sharkskin delivers multi-season protection against hard and soft marine growth.With 42% cuprous oxide in a hard, modified epoxy base, Sharkskin antifouling paint delivers multi-season protection against all types of marine fouling, including barnacles, sea grass, green weed and other fouling organisms. Sharkskin can be used in fresh- or saltwater. The hard, modified epoxy formula offers excellent abrasion resistance and stands up to occasional cleanings by a diver. Sharkskin can be applied to fiberglass, wood and properly-prepared steel hulls. Do not apply on aluminum hulls. Not for sale in States where prohibited by law.Key FeaturesDurable, abrasion-resistant modified epoxy base42% cuprous oxide formula aggressively combats growthConsistent viscosity for better flow and rolling abilityMay be applied over other modified epoxy paintsCompatible with fiberglass, wood and steel hullsDo not apply to aluminum hullsPhysical Data:Type: Modified epoxyFinish: Semi-glossAvailable Colors: Red, Blue, Black, GreenComponents: 1Curing Mechanism: Solvent releaseSolids by Volume: 62% +/- 2%Theoretical Coverage: 320sq.ft/gal.VOC: 320g/lActive Ingredients: Cuprous oxide 42%Flash Point: 80FApplicationApplication Method: Brush, roller, airless or conventional sprayNumber of Coats Recommended: 2 minimum, with additional coat(s) on leading edges and waterline recommendedWet Film Thickness/coat: 5mil.Dry Film Thickness/coat: 3.1mil.Application Temperature Min./Max. Range: 50F-95F (Optimum: 70F-80F)Thinner: Sea Hawk 2033Drying Times*Drying73F95FTo touch1 hr.1 hr.To recoat (min.)2 hr.1 hr.To recoat (max.)No max.No max.To launch (min.)12 hr.12